15700121 – Murphy Level Swichgage – EL150EX

The Murphy Liquid Level Swichgage EL150EX instrument is a combination liquid level gauge andlow limit switch; each unit includes (1) a chamber with pivotal float, (2) an indicating dial withpointer, and(3) a low-level contact. When properly installed and maintained, the float operates thepointer which, in turn, both indicates level during normal operation, and closes a switching circuit ifthe level falls to the low limit set point. The L150 features afield adjustable set point. The unit canbe mounted away from the engine for protection from vibration and extreme heat. The set point canbe adjusted at any time.The primary use of EL150EX is for engine cooling systems, surge or expansion tanks, condenserradiator or vapor phase systems, pressurized or atmospheric systems. The Level Swichgageinstrument can also be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activatealarms and/or shutdown at a predetermined minimum level. This instrument is built for low pressuresystems with a maximum of 25 psi (172 kPa) [1.72 bar].

This product may vary on delivery times, as factories do not guarantee production due to lack of raw materials.

COD: 15700121 Categorie: , Tag: ,
Love0

Descrizione

Features:

  • Indicating Gauge
  • Low Limit Switch
  • Float Operated
  • Monitors Level of Coolant, Lube Oil, Diesel Fuel and Hydraulic Fluid

Product specifications:

  • Part No.: EL150EX
  • Maximum Temperature: 250° F (121° C)
  • Maximum Operating Pressure: 25 PSI (172kPa)
  • Case: Sand cast aluminum, painted; approximate dimensions: 6-1/2 x 5-3/4 x 5-1/4 in. (165 x146 x133 mm)
  • Mounting Holes: (2) 5/16 in. (8 mm) diameter at 5-1/2 in. (140 mm) on center
  • Float: 304 Stainless steel
  • Lens:Polycarbonate
  • O-rings: Saturated Nitrile, are suitable for coolant or hydrocarbons.
  • Gasket: Nitrile
  • Vent Tube: 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in. (6 mm) tube fittingand 1/2 NPT to 1/4 NPT reducer fitting
  • Snap-Switch: SPDT rated 10 A @ 125 VAC;0.5 A @ 125 VDC; 10 A 30VDC
  • Shipping Weight:5lbs. (2.26kg.)
  • Laboratory Approvals: CSA Listed for Hazardous Locations Class I, Division 1, Groups C&D
  • Wire: Wired to terminal block
  • Shipping Dimensions: 6-1/2 x 6-3/4 x 6-3/8 in. (165 x 171 x 162 mm)

Product specifications:

Before freezing comes, check to be sure tour L150 or EL150 Series, coolante level switchage is filled with antifreeze solution the same as your engine block and radiator.

Hot to Order the singular parts are subject to separate quotation:

Parts Number Model and Description Notes
15700135 L150
15700144 L150-BC
15700121 EL150EX
15700124 EL150EX-D
15700116 EL150K1
15700118 EL150K1-BC
15700138 All parts except case and body L150 Repiar Kits
15700135 All parts except case and body EL150k1 Repair Kits
15000100 Lens / switch assembly EL150K1 Repair Kits
15000109 Switch / terminal assembly
15000107 Radiator fitting (PS), thin wall, 1/4 in. (6 mm) tube fitting
15010202 Radiator fitting (PS-D), for diesel or oil, think wall (to 1/4 in [6 mm]), accepts 1/2 in. (13 mm) I.D. hose or 1/4 in. (6 mm) O.D. tubing Accessories
15010167 Radiator fitting (PS Barbed), thin wall, 1/4 in. (6 mm) tubing or hose Accessories

Informazioni aggiuntive

Peso 2,26 kg
brand

Murphy
gtin

15700121, EL150EX
max-temp

121°, 250°
Maximum Inlet Pressure

25 PSI (172 kPa)
case

Approximate dimensions: 6-1/2 x 5-3/4 x 5-1/4 in (165 x 146 x 133 mm), Painted, San Cast Aluminium
mounting-holes

(2) 5/16 in. (8 mm) diameter at 5-1/2 in. (140 mm) on center
float

304 Stainless Steel
lens

Polycarbonate
o-rings

Saturated Nitrile, are suitable for coolant or hydrocarbons
gasket

Nitrile
vent-tube

1/2 NPT to 1/4 NPT reducer fitting, 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in. (6 mm) tube fitting
snap-switch

SPDT rating 10 A @ 125 VAC; 0.5 A @ 125 VDC; 10 A @ 30 VDC

Prodotti correlati