Descrizione
Test Mode
- Turn power supply and control voltage OFF
- Switch in position 6
- Turn Power supply ON
- Green LED ON, red LED flashing 5 times quicly
- Motor turns looked from gear side counterclockwise approx 1200” (=reference)
- Yellow LED ON, blue LED ON
- Apply control voltage of 3.3V, Motor turns clockwise 360°, Yellow LED OFF, blue LED ON
- Apply control voltage of 10,0V. Motr turns, clockwise to 1126°. Red LED ON, blue LED ON
- Turn all voltage off
- Switch in position 7
- Repeat the test
Motor turns in opposite direction
Rotary Switch for program typ (0..F)
1A, 2650ms:
- 0-10V = 1126-0°: 0
- 0-10V = 0-1126°: 1
3080ms:
- 0-10V = 1126-0°: 2
- 0-10V = 0-1126°: 3
3480ms:
- 0-10V = 1126-0°: 4
- 0-10V = 0-1126°: 5
1.3A, 2650ms:
- 0-10V = 1126-0°: 6
- 0-10V = 0-1126°: 7
3080ms:
- 0-10V = 1126-0°: 8
- 0-10V = 0-1126°: 9
DIESEL -> 3080ms:
- 5-10V = 1126-0°: A
- 5-10V = 0-1126°: B
- —: C
Endurance test:
- 3300ms, 1126°: D
- 6000ms, 1126: E
- 6000ms, 1126: F
Underlined in red = Adjustment for gas engine
Status LEDs
- Input <0,15V yellow
- Input > 9,75V red
Position: Actual = Set Blue
+5V OK green
