15700116 – Murphy Level Swichgage – EL150K1

The Murphy Liquid Level Swichgage EL150K1 instrument is a combination liquid level gauge andlow limit switch; each unit includes (1) a chamber with pivotal float, (2) an indicating dial withpointer, and(3) a low-level contact. When properly installed and maintained, the float operates thepointer which, in turn, both indicates level during normal operation, and closes a switching circuit ifthe level falls to the low limit set point. The L150 features afield adjustable set point. The unit canbe mounted away from the engine for protection from vibration and extreme heat. The set point canbe adjusted at any time.The primary use of EL150K1 is for engine cooling systems, surge or expansion tanks, condenserradiator or vapor phase systems, pressurized or atmospheric systems. The Level Swichgageinstrument can also be used to monitor lube oil, hydraulic fluid or diesel fuel reservoirs and activatealarms and/or shutdown at a predetermined minimum level. This instrument is built for low pressuresystems with a maximum of 25 psi (172 kPa) [1.72 bar].

This product may vary on delivery times, as factories do not guarantee production due to lack of raw materials.

Descrizione

Features:

  • Indicating Gauge
  • Low Limit Switch
  • Float Operated
  • Monitors Level of Coolant, Lube Oil, Diesel Fuel and Hydraulic Fluid

Product specifications:

  • Part No.:EL150K1
  • Maximum Temperature: 250° F (121° C)
  • Maximum Operating Pressure: 25 PSI (172 kPa)
  • Case: Die cast aluminum, polyurethane coated;approximate dimensions; 5 x 4-3/4 x 2-3/4 in.(127 x 121 x 70 mm)
  • Enclosure Rating: IP35
  • Mounting Holes: (2) 9/32 in. (7 mm) diameter at 4-1/2 in.(114 mm) on center
  • Float: Brass
  • Lens: Polycarbonate
  • O-rings: Saturated Nitrile, are suitable for coolant or hydrocarbons
  • Gasket: Nitrile
  • Vent Tube: 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in.(6 mm) tube fitting
  • Snap-Switch: SPDT rated 10 A @ 125 VAC;0.5 A @ 125 VDC; 10 A 30 VDC
  • Shipping Weight:42oz. (1.2kg.)
  • Wire: (3) 18 AWG x 14 in. (1 mm 2 x 356 mm)
  • Shipping Dimensions: 5-1/4 x 5-1/4 x 5-1/2 in.(133 x 133 x 140 mm)

Product specifications:

Before freezing comes, check to be sure tour L150 or EL150 Series, coolante level switchage is filled with antifreeze solution the same as your engine block and radiator.

Hot to Order the singular parts are subject to separate quotation:

Parts Number Model and Description Notes
15700135 L150
15700144 L150-BC
15700121 EL150EX
15700124 EL150EX-D
15700116 EL150K1
15700118 EL150K1-BC
15700138 All parts except case and body L150 Repiar Kits
15700135 All parts except case and body EL150k1 Repair Kits
15000100 Lens / switch assembly EL150K1 Repair Kits
15000109 Switch / terminal assembly
15000107 Radiator fitting (PS), thin wall, 1/4 in. (6 mm) tube fitting
15010202 Radiator fitting (PS-D), for diesel or oil, think wall (to 1/4 in [6 mm]), accepts 1/2 in. (13 mm) I.D. hose or 1/4 in. (6 mm) O.D. tubing Accessories
15010167 Radiator fitting (PS Barbed), thin wall, 1/4 in. (6 mm) tubing or hose Accessories

Informazioni aggiuntive

Peso 1,2 kg
case

Approximate Dimensions; 5 x 4- 3/4 x 2-3/4 in. (127 x 121 x 70 mm), Die cast aluminum, Polyurethane Coated

enclosure-rating

IP35

float

Brass

gasket

Nitrile

lens

Polycarbonate

max-temp

121°

maximum-operating-pressure

25 PSI (172 kPa)

mounting-holes

(2) 9/32 in. (7 mm) diameter at 4-1/2 in. (114 mm) on center

o-rings

Saturated Nitrile, are suitable for coolant or hydrocarbons

snap-switch

SPDT rating 10 A @ 125 VAC; 0.5 A @ 125 VDC; 10 A @ 30 VDC

vent-tube

PDT rated 10 A @ 125 VAC; 0.5 A @ 125 VDC; 10 A 30 VDC

wire

(3) 18 AWG x 14 in. (1 mm 2 x 356 mm)

brand

Murphy

gtin

15700116, EL150K1